How to Reset Printer Epson L120 220 310 365

The blinking epson printer or indicator light blinks, "It must be for those of you who are using the printer already familiar. The indicator blinks on the printer is the message or code for the user or the printer user on the printer is a problem, or error. The cause of this blinking light many causes for example, because there is a paper jam, the calculation of ink pad is full (waste ink pad counter) or also ask for reset ink (ink level)

For blinking due to clock paper errors or due to mechanical disturbances, the fixes are more focused on hardware such as mechanics, mainboard and other components. As for blinking because ask for reset ink or because the waste ink pad conuter reach the maximum limit, then how to fix it we focus to the software

For discussion on this post is how to overcome blinking or blinking lights because the ink ask for reset (ink level) or waste ink pad counter has reached the maximum, especially Epson L120 220 310 365 printers.

Epson L120 Adjustment Program

DOWNLOAD

Turn on the printer
Press the resume button about 5-10 seconds then release
Once the button is released in stage 2, usually the lit ink indicator will disappear immediately and the printer is ready for use
If after the 2nd stage the ink indicator light is still on, try press again for 5 seconds then release, press 3 seconds again, release after that press again 1 second. The interval from pressure 1 to next pressure must be fast
After this stage usually printer can be used again

For blinking caused by the waste ink pad that has reached the maximum, the solution is to use a special tolls adjustment according to the printer model. In this condition usually the indicator that appears is the ink and paper indicator lights turn on alternately since the printer starts up. In addition, it usually appears a message on the computer that connects to the printer such as service required. To reset it, please follow the following steps.

Download the pre-adjusted prgram
downloaded extract the extract first.
Double click L210.exe file and will appear the program as below. Then select the menu particular adjustment

Next select waste ink pad counter
In the waste ink pad counter menu, there will be two options: check and initialized. check option is to check the value of waste ink pad counter it has reached the maximum or not. The initialize option is to reset the value of waste ink pad counter to zero.
Before choosing initilize or check, do not forget to tick the main pad of his counter. For more details can be considered in the picture below.

If a po up message appears immediately click OK. After that turn off the printer.
The last step turn the printer back on and notice if blinking is still there ..?
If the blinking is blinking because of the full ink waste marked by the ink and paper ink indicator lights alternately, then at this stage should the printer be normal again and ready for use.

source